--
HOME--|-- RENTALS--|-- SALES --| --REPAIR & FIELD SERVICE-- |-- DESIGN, INSTALLATION & ACOUSTICS-- | --ABOUT US-- | --CONTACT US
CHURCH PROFILES
FEATURED INSTALLATIONS
Cathedral of the
Immaculate Conception
Dell Grove
Emmanuel Lutheran
Faith Lutheran
Faith UMC
First Congregational
First Lutheran-Newton IA
Holy Redeemer
Immaculate Conception
Our Saviours
Salvation Army
St Genevieve
St Gerards
St Henry
St Huberts
St Joseph -Amery
St Joseph -Waconia
St Marks
St Michaels-Madison
St Paul Seminary
St Philips
St Rose of Lima
St Rita
St Stephens
St Timothy
White Bear Lake UMC
ALL CHURCH PROFILES
All Church Profiles
OTHER PROFILES
Houses of Worship
Schools and Theaters
Stadiums & Arenas
Entertainment & Business
St Genevieve

This space was new construction. Before it was built, using Bose Modeler software, we made a computer model of the room. Virtually every sound system we install has been designed with the aid of Bose Modeler software. This allows us to see what the system will sound like. With the recent advent of Bose Auditioner (see Modeler link above) we are now able to let the customer actually hear the system before we install it.

We warned the customer that acoustic treatment was needed. They went ahead with the sound system and decided to add the treatment later as their budget allowed.

This is actually a multi-purpose room. The sound system was designed with that fact in mind.

Our solution in this reverberant room was to use a decentralized design that uses multiple speakers mounted close to the audience. Sound travels directly to the listener’s ears instead of bouncing off the walls and ceiling. This arrangement is commonly called a "distributed system". This also allowed us to turn off certain areas depending on how the room was being used. Bose ControlSpace was used to control the speakers and their output in the room.

Bose 402 speakers* were positioned down the center of the room. Bose Model 32s* were used for areas out of the main coverage pattern.

ControlSpace is a digital processor with PRESETS. It can be configured to provide single button solutions for almost all of your needs.
Presets can be made for:
• Summer services with no choir and pre-recorded music
• Weddings
• Choir practice
• Services where attendance is low (some speakers turned off)
• Services where overflow areas are used (speakers turned on)
• Controlling recordings
• Turning on your 32 channel mixer for the service with the full band!

Bose Panaray® 402® loudspeakers were the main speakers used in this distributed system. Weighing only 15 lbs each, they were aimed straight down to take advantage of their wide 120 x 60 degree coverage pattern.

Bose FreeSpace® 32SE loudspeaker were used to provide coverage to smaller areas. They use a single 11.34 cm driver (the 402 uses four) so the sound between the two areas is similar and seamless.

 

Open Monday through Saturday 10am to 6pm
2852 Johnson St NE, Minneapolis, MN 55418 Phone 612-789-2496 Toll Free 1-800-832-5174 email