 |
New JBL
Speakers
|
|
JBL VRX-932LAP |
| Only $75 |
|
|
Frequency Range:57 Hz - 20 kHz
Frequency Response:75 Hz - 20 Hz (+/-3db)
Maximum Peak Output:136 dB SPL
1750 Watts Peak, 875 Watts ContinuousDPC-2
:LF: 750 Watts, HF: 125 WattsDPC-2
LF Driver:1 x JBL 2262FF 12 in neodymium magnet
Differential Drive® with dual voice-coils
HF Driver 3 x JBL 2408J, 1.5 in voice-coil, neodymium magnet compression driver
Signal Processings:DSP based, resident in Input
AC Power:90-132 VAC
AC Current Requirements:6A per system at 120V
Dimensions (H x W x D):13.75 x 23.5 x 17.5
Net Weight:52 lb |
|
JBL VRX-918P |
| Only $75 |
|
|
Frequency Range:31 Hz – 220 Hz
Frequency Response:34 Hz – 220 Hz
1500 Watts Peak, 750 Watts Continuous
LF: 750 Watts
Maximum Peak Output:126 dB SPL peak
Autio Input Connector:XLR with loop through
Input Attenuator (0-16 dB)
Selectable 80 Hz or 120 Hz Low Pass
80 Hz High-Pass
Signal Processings:DSP based, resident in Input
AC Power:90-132 VAC
AC Current Requirements:6A per system at 120V
LF Driver:1 x JBL 2268FF 18 in Differential Drive woofer
Mounting:VRX-AF line-array frame or 10 mm eyebolts
Dimensions (H x W x D): 20.0 in x 23.5 in x 29.5 in
Net Weight:85 lb |
|
JBL VRX-932LA |
| Only $50 |
|
|
Frequency Range-57 Hz - 20 kHz(-10 dB)
Frequency Response-75 Hz - 20 Hz (+/-3db)
Coverage Pattern-100 x 15 nominal
Crossover Modes-4 Ohms Bi-amp / passive,
Crossover Frequency-132 dB SPL peak 1.2 kHz
Power Rating (Continuous / Program / Peak)
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
System Maximum SPL-Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
System Sensitivity 1w @ 1m
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
LF Driver-1 x JBL 2262H 12 in neodymium magnet Differential Drive® with dual voice-coils
HF Driver-3 x JBL 2407J, 1.0 in voice-coil, neodymium magnet compression driver
Nominal Impedance-Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
Input Connectors-Neutrik® Speakon® NL-4 (x2)
Dimensions (H x W x D)-13.75 x 23.5 x 15.0 in
Net Weight-48 lb |
|
JBL VRX-918S |
| Only $50 |
|
|
Frequency Range:31 Hz – 220 Hz
Frequency Response:34 Hz – 220 Hz
Power Rating (Continuous / Program / Peak):
800 W / 1600 W / 3200 W
System Maximum SPL:
130 dB SPL peak
System Sensitivity:
95 dB SPL
LF Driver:1 2268H 18" Differential Drive woofer
Nominal Impedance:8 ohms
Input Connectors:Neutrik® Speakon® NL-4 (x2)
Dimensions (H x W x D): 20.0 in x 23.5 in x 29.5 in
Net Weight:81 lb |
|
JBL PRX535 |
| Only $60 |
|
|
Frequency Range-39 Hz – 20 kHz
Frequency Response-46 Hz – 20 kHz
Nominal Impedance-64 K Ohms (balanced), 32 K Ohms (unbalanced)
Power Capacity-650 W continuous, 1300 W peak
Rated Maximum SPL -134 dB SPL peak
Coverage Pattern: -90° x 50° nominal
High Frequency Driver-1 x JBL 2408H, 37.5 mm (1.5 in) annular polymer diaphragm,
neodymium compression driver
Low Frequency Driver-1 x JBL 265F, 380 mm (15 in) Differential Drive® woofer
Dimensions (H x W x D) - 42 in x 17.25 in x 18.25 in
Weight-74 lb |
|
JBL PRX518S |
| Only $40 |
|
|
Frequency Range-39 Hz – 140 Hz
Frequency Response-52 Hz – 110Hz
Nominal Impedance-34 K Ohms (balanced), 18 K Ohms (unbalanced)
Power Capacity-500 W continuous, 1000 W peak
Rated Maximum SPL -129 dB SPL peak
Low Frequency Driver-1 x JBL 2044E, 18 in woofer
Dimensions (H x W x D) - 28.5 in x 21 in x 24 in
Weight-79 lb |
|
| |
JBL MRX512M |
| Only $20 |
|
|
Frequency Range-60 Hz - 20 kHz
Frequency Response-90 Hz - 20 kHz
Sensitivity 97dB SPL
Nominal Impedance- 8 ohm
Power Rating (Continuous / Program / Peak)
Power Capacity - 400W / 800W / 1600W
Rated Max SPL - 129dB SPL Continous
Coverage Pattern-70 x 70 nominal
HF Driver-1 x JBL 2408H, 1.5 in voice-coil, annular polymer diaphram, neodymium compression driver
LF Driver-1 x JBL 262H 305 12 in Differential Drive® woofer
Dimensions (H x W x D)-25.25 x 15 x 13.5 in
Net Weight-22 lb
|
|
